123ArticleOnline Logo
Welcome to 123ArticleOnline.com!

ALL >> General >> View Article

Industrial Process Ventilator

By Expert Author: Oleg Tchetchel

As the application specialists, Industrial Pressure Blower Co. has the expertise needed to supply the proper air moving equipment that is specifically designed for resisting the corrosive nature of these compounds. In other pollution control systems, our fans are installed on the clean side, which offer a higher efficiency design for moving gases into a scrubber or other device. One of the major challenges in wastewater and sewage treatment plants is controlling the odors that are emitted. These plants are often located in residential areas and forced to adhere to strict codes and regulations. These odors are caused by gases such as hydrogen sulfide and ammonia. To reduce odor emissions a variety of systems have been found effective, such as thermal oxidation, chemical scrubbers and biofilters. The fan requirements in these processes are similar in that they require special alloys, coatings or fiberglass construction.

Aeration involves moving air through either a solid or fluid medium bed and is used for various purposes. Depending on specific material being aerated, our fans are utilized for moisture control in applications such as grain bin storage, and also provide oxygen and control moisture / temperature in composting applications. Due to varying environmental conditions, fans used in aeration systems often require special construction such as fiberglass, alloys and specialty coatings.

Through decomposition, landfills produce syngas, a combination of methane carbon monoxide, and other hazardous gases. To avoid dangerously high levels of these gases, forced draft fans are used to drive fresh air into the landfill mass. Induced draft fans are also used for pulling noxious gases out of the landfill for safe disposal or for collecting them as a fuel source. The fans used in these applications often require special materials or coatings along with spark resistant construction. Depending on your specific needs, Twin City Fan will work with you to select the proper air moving equipment.

High volume, low concentration or non-condensable gases refers to gases that are in concentrations below their explosion limit. These gases are drawn through an induced draft fan and then processed with a RTO (regenerative thermal oxidizer) or incinerator that ultimately burns the gases for safe disposal. HVLC gases are often corrosive and at elevated temperatures, that is why we provide a number of fans that are corrosion resistant. In addition, we offer leak-tight construction to avoid emitting these toxic, flammable gases into the environment. In the case that these gases are above their explosion limit, Buffalo Blower supplies a full line of non-sparking fans that allow for the safe movement of hazardous gases. Based on your specific requirements, our fans can be constructed with aluminum and monel materials.

In a manufacturing environment, vacuum systems are used to move and transport waste material. Sawdust, metal shavings, and other waste is easily transported away from work areas to a specified collection point for simplified clean up and removal. Vacuum systems are also used to provide suction for the manipulation of components, various materials and forming processes. These systems usually consist of long runs of relatively small diameter pipe or ducting. This results in the need for high pressure low flow fans.

Boilers are used in a variety of industries for producing heat and energy. Many boiler applications will burn fuel readily available on site, such a byproduct from the given process. An example of this is Bagasse, which is a fibrous matter that remains after sugarcane is processed to extract their juices. The bagasse is a biofuel used for many boiler applications. Fans in boiler applications are forced draft, induced draft, over fire air and combustion air.

For additional information please refer to http://industrialpressureblower.com/index.html

Oleg Tchetchel
Industrial Ventilation Engineer
blower@industrialpressureblower.com
Industrial Pressure Blower Co.
http://industrialpressureblower.com/contact.html
http://industrialpressureblower.com/inquiry.html

Total Views: 38Word Count: 605See All articles From Author

General Articles

1. Post Market Surveillance Needs To Be Robust To Avoid Penal Regulatory Action
Author: Event Manager

2. Manav Infra Projects: Experts In Infrastructure Development Domain In India!
Author: Manav Infra

3. Why Branding Is A Non Negotiable Investment In The Fresh Produce (ffv) Space!
Author: Asha Sampath

4. Cavity Wax - Things You Should Be Aware Of!
Author: Efrain Rivas

5. What's The Difference Between Water Purification And Water Filtration?
Author: Ring Hot Water

6. Enjoy Pattaya Golf Course On Thailand Golf Tour
Author: Hanah Chen

7. Seeking Online Success - Hire Social Media Advertising Agency
Author: Charlottesocial360

8. Why Are Water Jets So Important?
Author: Colin Sponias

9. Cheap T-shirt Printing As Per Your Desire
Author: parveen kumar

10. What Are The Benefits Of Different Types Of Fans?
Author: Nanshi Pacheco

11. What You Don’t Know About Tiki Bars?
Author: Scott McCauley

12. Ethical Link Building Strategies Without The Seo Risks
Author: Swadesh Das

13. Advanced Travel Trends To Anticipate For In Year 2017
Author: Kundan Sharma

14. Visa For New Zealand
Author: jmathenge

15. Get The Right Shape Of Your Need From The Cut And Sew Manufacturers
Author: parveen kumar


Login To Account
Login Email:
Password:
Forgot Password?
New User?
Sign Up Newsletter
Email Address: