123ArticleOnline Logo
Welcome to 123ArticleOnline.com!

ALL » Health >> View Article

Industrial Process Ventilation Fan

By Expert Author: Susan Terlitski

The treatment of wastewater can result in a variety of unwanted and hazardous gases, such as H2S and SO2. As the application specialists, Canada Blower has the expertise needed to supply the proper air moving equipment that is specifically designed for resisting the corrosive nature of these compounds. In other pollution control systems, our fans are installed on the clean side, which offer a higher efficiency design for moving gases into a scrubber or other device. One of the major challenges in wastewater and sewage treatment plants is controlling the odors that are emitted. These plants are often located in residential areas and forced to adhere to strict codes and regulations. These odors are caused by gases such as hydrogen sulfide and ammonia. To reduce odor emissions a variety of systems have been found effective, such as thermal oxidation, chemical scrubbers and biofilters. The fan requirements in these processes are similar in that they require special alloys, coatings or fiberglass construction.

Aeration involves moving air through either a solid or fluid medium bed and is used for various purposes. Depending on specific material being aerated, our fans are utilized for moisture control in applications such as grain bin storage, and also provide oxygen and control moisture/temperature in composting applications. Due to varying environmental conditions, fans used in aeration systems often require special construction such as fiberglass, alloys and specialty coatings.

Through decomposition, landfills produce syngas, a combination of methane carbon monoxide, and other hazardous gases. To avoid dangerously high levels of these gases, forced draft fans are used to drive fresh air into the landfill mass. Induced draft fans are also used for pulling noxious gases out of the landfill for safe disposal or for collecting them as a fuel source. The fans used in these applications often require special materials or coatings along with spark resistant construction. Depending on your specific needs, Twin City Fan will work with you to select the proper air moving equipment.

High volume, low concentration or non-condensable gases refers to gases that are in concentrations below their explosion limit. These gases are drawn through an induced draft fan and then processed with a RTO (regenerative thermal oxidizer) or incinerator that ultimately burns the gases for safe disposal. HVLC gases are often corrosive and at elevated temperatures, that is why we provide a number of fans that are corrosion resistant. In addition, we offer leak-tight construction to avoid emitting these toxic, flammable gases into the environment. In the case that these gases are above their explosion limit, Buffalo Blower supplies a full line of non-sparking fans that allow for the safe movement of hazardous gases. Based on your specific requirements, our fans can be constructed with aluminum and monel materials.

In a manufacturing environment, vacuum systems are used to move and transport waste material. Sawdust, metal shavings, and other waste is easily transported away from work areas to a specified collection point for simplified clean up and removal. Vacuum systems are also used to provide suction for the manipulation of components, various materials and forming processes. These systems usually consist of long runs of relatively small diameter pipe or ducting. This results in the need for high pressure low flow fans.

Boilers are used in a variety of industries for producing heat and energy. Many boiler applications will burn fuel readily available on site, such a byproduct from the given process. An example of this is Bagasse, which is a fibrous matter that remains after sugarcane is processed to extract their juices. The bagasse is a biofuel used for many boiler applications. Fans in boiler applications are forced draft, induced draft, over fire air and combustion air.

Additional information can be found at the Canada Blower company web site http://www.canadablower.com/hvac/index.html

Susan Terlitski
Air Systems Designer and Engineer
Canada Blower

Total Views : 43Word Count Appx. : 626See All articles From Author

Health Articles

1. How To Start Up With The 200 Hour Yoga Teacher Training In Nepal?
Author: Buddha Lama

2. Natural & Simple Way To Get Good Health Reveled
Author: Iriena Brown

3. How To Find The Best Medical Transcription Service
Author: William Tyler

4. How Long Do Porcelain Veneers Last?
Author: James Franklin

5. Some Of The Different Kinds Of Cannula
Author: Puneet Dhawan

6. How To Increase Sperm Count Naturally With Herbal Semen Enhancer Pills?
Author: Michael Jayden

7. Natural Energy Booster Remedies To Improve Male Vitality In A Safe Manner
Author: Michael Jayden

8. Member Rash Or Bumps: Is It A Socially Shared Infection?
Author: John Dugan

9. New Pet Scan May Be Better For Prostate Cancer Follow-ups
Author: petcttexas

10. Your Healing Assured With The Acupuncture Brunaby Service
Author: Braylen Thomas

11. Here Are The Things That You Have To Do Before You Buy A Dental Practice
Author: Ricky thomson

12. Treatment For Sleep Apnea And Snoring
Author: Alex Bowmann

13. Tips For Getting A Good Night’s Sleep
Author: Alex Bowmann

14. Bookkeeping Software That Helps You Manage Your Small Business
Author: William Tyler

15. Understanding Ayurveda How Ayurvedic Products Offer Healing Effects
Author: NaturalTherapyIndia

Login To Account
Login Email:
Forgot Password?
New User?
Sign Up Newsletter
Email Address: