123ArticleOnline Logo
Welcome to 123ArticleOnline.com!
ALL >> Technology,-Gadget-and-Science >> View Article

Top 10 Tips On Installation Of Tit Probe In An Aircraft

By Author: Joseph Polizzotto
Total Articles: 12

Here are the top 10 tips on installation of a Turbine Inlet Temperature (TIT) probe in your aircraft:

1. Before you even open the package containing the TIT probe, you need to do a little planning i.e. determine the exact location of hole for placing the TIT probe and while doing so, ensure that there is nothing nearby that would interfere with the probe, clamp, clamp screw or wire of the TIT probe.

2. Provide service loops at the instrument – you don’t want to run out of wire during maintenance at some future date.

3. Provide service loops at the engine end as well so that the probe can be swapped to adjacent cylinder positions for troubleshooting purposes.

4. Ensure all wires are kept away from any high temperature components such as exhaust stacks.

5. Ideally, do not splice thermocouple wire using copper wire. We also do not recommend soldering the thermocouple wire. But if you have no other option, solder using zinc chloride flux such as Nokorode brand – not rosin flux.

6. When making the connection, double check the polarity of your Probes & Aircraft Sensor Systems wires.

7. The standard TIT probe PN M111-T for Aircraft Single Engine Monitors comes equipped with a #48 clamp that is placed in the exhaust stack accumulator to a maximum depth of 1/2 inch and approximately 4 inches from the turbine inlet if possible, on the wastegate side of the turbine.

8. Here is a list of things required for installation of the TIT Probes:

I. Slim Line Display (if you haven’t fitted one already), 2 mount. Screws: 1
II. Thermocouple Wire 8’
III. Molex 0.256” Connector Pins: 2
IV. Connector housing: 1
V. Stainless Steel Clamp Thimble: 1
VI. Stainless Steel Exhaust Seal Washer: 1
VII. Stainless Steel Screw Clamp #48: 1
VIII. M-111 Thermocouple Probe: 1

9. If the TIT Probe has been fitted properly than the reading on your panel should be 1650 Fahrenheit.

10. TIT Probe installation schematic:

More information here: https://www.jpinstruments.com/shop/tit-probe/

Total Views: 35Word Count: 311See All articles From Author

Technology, Gadget and Science Articles

1. Is There Any Difference Between Wifi Netgear Wifi Booster And Extender?
Author: tomar

2. Will Simulators Really Transform The Learning Process In The Near Future?
Author: Esha Zaveri

3. Think You Can Start An Ecommerce Store? Know These Hacks
Author: Johan Smith

4. 2 Mobile App Development Trends To See In 2019
Author: Aiden Adey

5. Innowave It Infrastructure To Increase Headcount By 1500 In 2019
Author: Anurag David

6. How To Activate Mcafee On Android Device?
Author: john smith

7. Check Out Some Cool Weather Forecasting Apps
Author: Johan Smith

8. Vigor Sst100 Series Inclinometer Successfully Applied On Communication Tower In Russia
Author: Kate

9. Internet Of Things (iot) In Warehouse Management Market | Global Research Insights 2018-2027
Author: Suraj Suryavanshi

10. Pokemon Go: Guide To Find And Catch Aerodactyl, Fossil Pokemon
Author: Aida Martin

11. What Is Citations And Why Are These Important For Seo?
Author: Bhuvnesh Aggarwal

12. Tips And Tricks For Using Instameet
Author: Aida Martin

13. Limitations Of Data Wipe For Phones And Laptops
Author: Kelly Sanchez

14. Check The Reputability Of A Repair Shop Before You Take Your Phone
Author: Charlie Wollstonecraft

15. Unfolding The Profound Impact Of Iot Technology On Businesses In 2017
Author: Johan Smith

Login To Account
Login Email:
Password:
Forgot Password?
New User?
Sign Up Newsletter
Email Address: