123ArticleOnline Logo
Welcome to 123ArticleOnline.com!
ALL >> Service >> View Article

Step-by-step Guide To Design A Tensile Structure – Tensile Architect

By Author: Tensile Structure
Total Articles: 9

To build anything, you need to apply your heart to it”, they say. According to us, though, you need a lot more. Constructing a tensile structure is a technical task but simple. We explain how.

Have you ever wondered what it takes to design a tensile structure of your own? Unlike the traditional buildings of brick and concrete this is not that difficult to design. But it isn’t easy either especially if you have no idea how the structures work. That’s why you need to consult an expert and that’s precisely the reason why we are here – to make your search of an expert tensile architect quicker.

If it’s the process that’s confusing you, it won’t after confuse you any longer after this article. In this article, we will explain the entire design stage step-by-step. So, let’s begin.

Preparation is necessary. It doesn’t matter whether you are preparing for an exam or trying to construct a tensile structure, you do need some preparatory works. In case of tensile structure, it involves asking the right questions.

What’s the purpose?
What’s the intended life of the structure – is it to be temporary or is it to be permanent?
How well is accessible is the site location?
What about its maintenance once it’s completed?
How much’s the money, honey?

Once you are done with answering the above questions, we begin the important steps.

Step 1: Designing is not a job made for all

By the most important stage. It affects not just the final outlook of the tensile structure but also the subsequent steps like fabrication and installation. Design is an art and an art takes time as well as expertise. This is where tensile architect comes in. With an experience of almost 2 decades in designing tensile structures, we have some of the best experts to offer you a service. The structures could be designed by taking the help of different softwares like AutoCAD, Mpanel etc. An image below shows how it looks like. This step impacts the aesthetics to a large extent.


Step 2: Engineering is the strength

No construction is complete without the involvement of an engineer. They are crucial for deciding the stability, balance and safety of designs created by the tensile architect and designers. The engineers often work in conjunction with design team and are aided by various design software.

Step 3: Fabrication is the building block

Fabrication can be termed as the base of any tensile structure. Though largely dependent on step 1, fabrication has its own technicalities. In simpler terms, it involves creating a tensile fabric from raw materials – they could be different polymers like PVC, ETFE, etc. and/or fibers. It must be kept in mind that each polymer imparts its own unique characteristics to the tensile structure. The task of a tensile architect is to choose the ones that fit and meet our requirements perfectly. This stage is crucial since much of the advantages attributed to a tensile structure like durability; resistance to heat and weather, flexibility, strength etc. is decided here. A properly fabricated fabric is usually multi layered and looks something like the one below.

Step 4: Fabrication of associated parts

A tensile structure needs anchorages and supports to hold the fabric. The shape of the structure too is largely dependent on their positions and/or placements. We need to fabricate them as well. Though largely made of steel, they could be made from other materials as well.

Step 5: Installation

‘All is well that ends well’, is a common saying and the same is true for tensile structure as well. One of their primary vantage points is the ease of installation. The structure is not completed until it is solidly installed at the desired location. In fact, it is the most crucial step because it defines how a tensile structure will appear in reality. By careful and clever placement of supports, the shapes and curvatures of the tensile fabrics can be adjusted accordingly. Some of the likely curvatures have been shown in the image below. But this image in no way represents all possible curvatures and shapes.  Though the shape and design is finalized in the step 1 and step 2, it’s here that they finally see fruition.

Step 6: Maintenance

‘Things always tend to go wrong’ is an oft repeated theme in Physics, fondly named as Murphy’s Law. In simple terms what it means is that everything in this world is bound to break down as it gets old. The key to extending this limit is proper and regular maintenance. Maintaining a tensile structure is rather cheap and easy compared to traditional structures. Usually it involves sweeping the dust off the fabrics or adjusting the anchorages etc. It could be done manually or you could use automatic dust sweepers as well.

So, now we are pretty sure that you are well aware of the stages that are involved in erecting any tensile structure from scratch. Designing your own tensile structure could be fun. All that you need to do is follow this step religiously. 

Tensile Architecture is a company which deals with manufacture and supply of polycarbonate, prefabricated and tensile fabric structures for different structures like car parking Tensile Structure, walkway Tensile Structure, sun sheds, canopies etc. Visit their website at http://www.tensilearchitect.in/ to know more about it and its products.

Total Views: 110Word Count: 886See All articles From Author

Service Articles

1. Akshaya Patra In Dussehra Celebration
Author: Unknown Member

2. Hotels In Tirupati Near Railway Station | Three Star Hotels In Tirupati
Author: Unknown Member

3. Reconciling An Account In Quicken For Windows
Author: Unknown Member

4. Buying Residential Elevators – Learn The Necessary Factors Here!
Author: Unknown Member

5. Top Interior Designer In Jaipur
Author: Unknown Member

6. How Much Is Enough For Bathroom Renovations?
Author: Unknown Member

7. How Is Professional Interior Designer?
Author: Unknown Member

8. Here's What Industry Insiders Say About Coldman, Cold Chain Company.
Author: Unknown Member

9. Do Proper Maintenance Of Your Aircon For Best Results
Author: Unknown Member

10. Accounting Firms In Riyadh
Author: Unknown Member

11. Ost To Pst Converter Software
Author: Unknown Member

12. Truck Wraps Are The Best Resources To Market Your Business
Author: Unknown Member

13. Facebook Hacked Account +1-800-307-9891 Recovery Phone Number
Author: Unknown Member

14. A Guide To Buying Aluminium Windows For Your House
Author: Unknown Member

15. Managed Service Provider
Author: Unknown Member

Login To Account
Login Email:
Forgot Password?
New User?
Sign Up Newsletter
Email Address: